179.50K
Категория: ЭлектроникаЭлектроника

Using Printer Class USB – Make sure the Port Selection says ON, if not double click the blue bar

1.

Using Printer Class USB – Make sure the Port Selection says ON,
if not double click the blue bar

2.

Select the Flash button and then navigate to
where you saved the .bin file

3.

Select the .bin file and press Send, this will take a few minutes

4.

Flash file loaded successfully. Now select the Boot button

5.

Navigate to the .pbt file and press send

6.

Firmware upgrade is now complete
English     Русский Правила