1.51M
Категория: МеханикаМеханика

System Setup

1.

1. Slide the sequin and check it

2.

2. Loose screw

3.

3.Loose motor handle and push as below picture

4.

4. Choose [ Joint & Sequin ] -> SET

5.

5. Choose [ Excitation ] -> SET
The motor will be stop.

6.

6. Lock the bolt and check sequin.

7.

6-1. If you still have
problem, make
loose plate spring.

8.

7. The needle must be fit the sequin center
8. If it is O.K, Lock the bolt and check the
sequin again

9.

9.The encoder must be Indicate 100˚
10. Fix it before the sequin is not moving and
fix all bolt again.
English     Русский Правила