Похожие презентации:
Mirror like this, floating 50mm from wall
1.
Mirror like this, floating 50mm from wallBrass 5mm flat bar edging with back lit up & down
Mirror
With back lit
Vanity counter looks shallow,
Please check 500mm depth
Tinted bronze glass
Shelf 10mm thickness
150mm depth
150
50
20
200
200
Counter top thickness,
Recessed finger groove,
Towel store open shelf
Hand towel hanging at center of
Counter
Dimensions are guide only,
More less this image
This is ribbed timber finish
Model is not like this,
Adjust colour like this
This is vanity counter top and splash back stone
50
2.
Outside is bright but some howMake it contrast of lighting effect ,
Current image is little bit washing out
Colour and texture.
Spotlight onto basin,
Pool of lighting effect on the
Counter top surface
Mirror
With back lit
No skirting onto tiled wall
Showing tile joints
3.
Same as other tile finish,Brick bond tile joint
Remove wall deco
water
Same finish as wall
Floor and wall tiles 450x900
Brick bond joint, matt finish
Wall and floor tile
Honed finish
4.
Bulkhead above doorTiled finish
Timber door frame 50mm thickness x 100mm
Door has no detail, opened position
No detail on the door
5.
This ceiling extendedPlanter
Remove these timber frame
Bay window and seating image,
recessed kick plate,
Curtain at front of seating as similar setting as
lounge
Plinth is bronze colour finish, not black
Timber finish
TV unit
Slightly distorted this wardrobe door width
make it narrow for visual adjustment
6.
Change art7.
Client like these images whichContrast shadow and lights,
Material and richness depth of colour tone
Please adjust richness of tone instead of over lit effect
8.
High gross polyurethan finishWall unit
Added glass door shelf, brass frame
/ ribbed glass with lighting inside
As this image
9.
No detail on the door20mm Shadow line between ceiling and unit
Shelf aligned with glass unit shelf
Added drawer inside
Glow lighting inside image
Reduced linear lights are OK
Linear lighting move inside front frame and
Shallower shelf lit it from front
Glass shelf
Glass shelf
Lights on this space, brighter floor and wall
10.
Splash back and counter top stoneShadow line image,
And lighting image
Not follow these detail
Narrower
11.
Window frame are mixed colour?Adjusted all matt black frame, if it is reflection
Then reduce effects
Add stainless steel handrail
Top of glass balustrade
Omit this piece,
Misreading
Padded seating and
Box at bay window
As similar to below
Recessed kickplate
Curtain slightly
front of bay window seating,
Wider opening right handside
Bay window seating are not
Sticking out beyond side window
12.
New timberNew pendant
New dining table
New lamp
New
dining
chair
New sofa
New coffee table
New rug
13.
ADD ADDITIONAL SCATTERSFabric to seat cushion and back
frame and loose cushions
https://www.minotti.com/en/the-world-ofmaterials#/list/914/917
Fisher / 10 Ghiaccio
Leather to base and shelf arm
https://www.minotti.com/en/the-world-ofmaterials#/list/914/917
Cervo Leather / 06 Pomice
Rectangular scatter
Square scatter
New lamp on sofa shelf arm
14.
New rug designNew coffee table – use current accessories on table
New coffee table stone
15.
New dining chairNew pendant light
Glass top
New dining table
Timber base
16.
Adjust bar stool colouration– Upholstery and timber to
match these.
Looks like we are
looking at the back of
this arrangement
Add bowl in this
colour on book
17.
Décor / objet here to be revised.Coloured ceramics, books and
some framed abstract artwork
FAMILY
KITCHEN
DINING &
LOUNGE
Position of armchairs should be on the rug –
coffee table position to be adjusted if needed
BALCONY
18.
Please add a few sculptural item in here –doesn’t look like anything have been
added
19.
New pendantNew dining table
Seating now built in – not loose furniture.
Fabric to remain as is
New lamp
New sofa
New coffee table
New rug
New
dining
chair
20.
Blind fabric – more sheerPlant to be bigger – leaves to be a
fresher green like this image
Stack drapery to one side –
looks odd with the voile
showing on either side of it
Armchair to be modeled correctly
with correct fabric to back
21.
Newartwork
New bedside lamp
Seating now built in – not loose furniture.
Fabric to remain as is
New timber
New bed
New ottoman
22.
New bed and ottoman – throw to remain as per current CGIFor bedding please revise bed cushions
to match this. Colouration as per this
New bedside lamp
23.
Please rotate the rug to this so we see more of of thestronger colour in the design
Bed
24.
See following slide for scattercomments
Rug texture and sheen
25.
Fabric to seat cushionpiping fabric
Scatter concept
bolster
Please use these
approx. sizes but make
cushions look like
seating ref image
26.
New artwork options27.
28.
Remove ottoman and replacewith this towel rack - include
white towels
Omit these flowers
– leave centre one
White colouration
Move bath matt to here