2.27M
Категория: ЭлектроникаЭлектроника

KX-TDE/NCP. New Features/Functions

1.

KX-TDE/NCP
New Features/Functions
Ver.4 (Edition-7)
Panasonic System Networks CO.,LTD.

2.

New Features/Functions - 1
The new features/functions are available from,
- KX-NCP500/1000 MPR Ver.4.
- KX-TDE100/200/600 MPR Ver.4.
Note
VoIP Expansion
- IP-TSW Speech Path
- 64ch SIP Trunk
- VoIP Channel Capacity
- DECT-CS on NCP
Network Feature Enhancement
- Message Waiting
- Absent Message
- Called party name display before answer
- Call Waiting
Network ICD-Group (UCD is supported)
Improved Conference Group Function
Improved Conference Features
Paging to DECT
Call-FWD CLIP
Improved Centralized VM Function
New MPR Required
A/K is needed
A/K is needed
A/K is needed
A/K is needed
A/K is needed
A/K is needed

3.

New Features/Functions - 2
The new features/functions are available from,
- KX-NCP500/1000 MPR Ver.4.
- KX-TDE100/200/600 MPR Ver.4.
Note
Improved Call-FWD N/A Function
(Ringing after C-FWD)
Improved CA integration
Alternative call if VoIP call fails
Improve VoIP (H.323) Connection
- Support Non-Fast Connect
- H323-ID registration
Other Improvements
- BSS Operation Programming
Reserve Bit Function
A/K is needed

4.

VoIP Expansion
- IP-TSW Speech Path
- 64ch SIP Trunk
- VoIP Channel Capacity
- DECT-CS on NCP

5.

VoIP Expansion
Ver.4 Improvements
PBX
Version
IP-TSW Speech
Path (ch) (*1)
SIP-Trunk (ch)
IP-PT
SIP Ext (ch)
IP-CS (Units)
TDE600 TDE100/200 NCP1000
Ver.3 Ver.4 Ver.3 Ver.4 Ver.2 Ver.4
49
113
49
113
49
113
32
64
32
64
32
64
128
128
128
128
64
16
16
16
16
8
NCP500
Ver.2 Ver.4
49
113
8
40 IP-PT
128
32 SIP
16
8
64
128
16
*1) New MPR card is needed.
Trunk/Extension
IP-Trunk
IP-Extension
Protocol
H.323
SIP Trunk
IP-PT
SIP-Ext.
IP-CS
Ver.4
32ch (*2)
64ch
128ch
128ch
128ch (16 units)
TTL
64 ch
128 ch
*2) H.323 IP-Trunk of NCP500 expands 32ch, same as NCP1000, TDE100/200/600.

6.

IP-TSW Speech Path (113 path) -1
New MPR Card + Ver.3 = 49 path
Old MPR Card + Ver.4 = 49 path
New MPR Card + Ver.4 = 113 path
CO
IP Trunk
MPR
Legacy
DSP
IP-Ext.
IP CS
How to identify new H/W
New MPR card is needed.

7.

IP-TSW Speech Path (113 path) - 2
How to identify new H/W
Old H/W
Should be “XA”
New H/W

8.

64ch SIP Trunk -1
Ver 4.0
TDE100/200/600
16ch x 2
16ch x 4
Ver 4.0
NCP1000 Ver.2
16ch x 2
16ch x 4
NCP500 Ver.2
8ch x 1
Only Software upgrade.
16ch x 4

9.

64ch SIP Trunk -2
Ver 2/3
16ch x 2
Ver.2/3 supports 32ch SIP Trunk.
Two contracts/accounts (16ch + 16ch)
Ver 4.0
64ch x 1
Ver.4 supports 64ch SIP Trunk.
Supports 64ch by one contract/account
New PCMC Channel Attribute Programming Menu

10.

DSP Power
VoIP Channel Capacity - 1
DSP Resource
Source -1
Source - 2
Traditional (CO/Ext.)
Traditional (CO/Ext.)
Traditional (CO/Ext.)
Traditional (CO/Ext.)
IP-Ext.(G711)
IP-Ext.(G711)
IP-Ext.(G729)
IP-Ext.(G729)
IP-CS (G711)
IP-CS (G711)
IP-CS (G729)
IP-CS (G729)
IP-Ext./IP-CS (G711)
IP-Ext./IP-CS (G729)
IP-Ext./IP-CS (G729)
IP-Trunk (G711)
IP-Trunk (G729)
IP-Ext./IP-CS (G711)
IP-Ext./IP-CS (G729)
IP-Trunk (G711)
IP-Trunk (G729)
IP-Trunk (G711)
IP-Trunk (G729)
IP-Trunk (G711)
IP-Trunk (G729)
IP-Trunk (G711)
IP-Trunk (G729)
IP-Ext./IP-CS (G711)
IP-Ext./IP-CS (G711)
IP-Ext./IP-CS (G729)
DSP
Resource
2
3
5
5
1
2
4
4
2
4
5
6
5
6
8
8
3
5
6
7
6
7
9
9
2
3
5
6
8
8
DSP DSP DSP
-4
-16 -64
16
64
256
DSP-64
DSP-4/16

11.

VoIP Channel Capacity - 2
The max. number of simultaneous telephone calls (NCP1000/500).
Talking Party
IP-Trunk
IP-PT
IP-Trunk
SIP
IP-Trunk
IP-CS
IP-Trunk
Legacy Ext
G711 G711
G711 G729
G729 G729
G711 G711
G711 G729
G729 G729
G711 G711
G711 G729
G729 G729
G711
G729
NCP1000
NCP500
DSP DSP DSP DSP DSP DSP
4
16
64
4
16
64
8
32 32 64
8
32 32 64
2
12 32 42
2
12 32 42
2
8
32
2
8
32
8
32 32 64
8
32 32 64
2
12 32 42
2
12 32 42
2
5
32
2
5
32
3
18 32 50
3
18 32 50
2
9
32 35
2
9
32 35
1
5
27
1
5
27
5
32 32 44
5
28
28
2
12 32 44
2
12
28
SIP Trunk
H.323 Trunk
[Restriction Key]
DSP
Power-1
Number of TDMIP Channels
Number of
Trunks
Number of
Handsets.
DSP
Power-2

12.

VoIP Channel Capacity - 3
The max. number of simultaneous telephone calls (NCP1000/500).
Talking Party
Legacy-CO
IP-PT
Legacy-CO
SIP
Legacy-CO
IP-CS
Legacy-Ext
IP-PT
Legacy-Ext
SIP
Legacy-Ext
IP-CS
G711
G729
G711
G729
G711
G729
G711
G729
G711
G729
G711
G729
NCP1000
DSP DSP DSP
4
16
64
16
64
64
4
16
64
16
64
64
4
16
64
16
64
64
4
16
64
16
44
44
4
16
44
16
44
44
4
16
44
16
44
44
4
16
44
NCP500
DSP DSP DSP
4
16
64
16
64
64
4
16
64
16
64
64
4
16
64
16
64
64
4
16
64
16
28
28
4
16
28
16
28
28
4
16
28
16
28
28
4
16
28
[Restriction Key]
DSP
Power-1
Number of TDMIP Channels
Number of
Trunks
Number of
Handsets.
DSP
Power-2

13.

VoIP Channel Capacity - 4
The max. number of simultaneous telephone calls (NCP1000/500).
Talking Party
G711 G711
G711 G729
G729 G729
G711 G711
G711 G729
G729 G729
G711 G711
G711 G729
G729 G729
IP-CS
IP-PT
IP-CS
SIP
IP-CS
IP-CS
NCP1000
DSP DSP DSP
4
16
64
8
32
56
3
12
42
2
8
32
8
32
56
3
12
42
2
8
32
8
32
32
3
12
32
2
8
32
NCP500
DSP DSP DSP
4
16
64
8
32
56
3
12
42
2
8
32
8
32
56
3
12
42
2
8
32
8
32
32
3
12
32
2
8
32
[Restriction Key]
DSP
Power-1
Number of TDMIP Channels
Number of
Trunks
Number of
Handsets.
DSP
Power-2

14.

VoIP Channel Capacity - 5
The max. number of simultaneous telephone calls (TDE100/200/600).
Talking Party
IP-Trunk
IP-PT
IP-Trunk
SIP
IP-Trunk
IP-CS
IP-Trunk
Legacy Ext
G711 G711
G711 G729
G729 G729
G711 G711
G711 G729
G729 G729
G711 G711
G711 G729
G729 G729
G711
G729
TDE100/200
TDE600
DSP DSP DSP DSP DSP DSP
4
16
64
4
16
64
32 32 64
32 32 64
12 32 42
12 32 42
8
32
8
32
32 32 64
32 32 64
12 32 42
12 32 42
8
32
8
32
18 32 50
18 32 50
9
32 35
9
32 35
5
27
5
27
32 32 64
32 32 64
12 32 50
12 32 50
SIP Trunk
H.323 Trunk
[Restriction Key]
DSP
Power-1
Number of TDMIP Channels
Number of
Trunks
Number of
Handsets.
DSP
Power-2

15.

VoIP Channel Capacity - 6
The max. number of simultaneous telephone calls (TDE100/200/600).
Talking Party
Legacy-CO
IP-PT
Legacy-CO
SIP
Legacy-CO
IP-CS
Legacy-Ext
IP-PT
Legacy-Ext
SIP
Legacy-Ext
IP-CS
G711
G729
G711
G729
G711
G729
G711
G729
G711
G729
G711
G729
TDE100/200
DSP DSP DSP
4
16
64
64
113
16
64
64
113
16
64
64
113
16
64
64
113
16
64
64
113
16
64
64
113
16
64
TDE600
DSP DSP DSP
4
16
64
64
113
16
64
64
113
16
64
64
113
16
64
64
113
16
64
64
113
16
64
64
113
16
64
[Restriction Key]
DSP
Power-1
Number of TDMIP Channels
Number of
Trunks
Number of
Handsets.
DSP
Power-2

16.

VoIP Channel Capacity - 7
The max. number of simultaneous telephone calls (TDE100/200/600).
Talking Party
G711 G711
G711 G729
G729 G729
G711 G711
G711 G729
G729 G729
G711 G711
G711 G729
G729 G729
IP-CS
IP-PT
IP-CS
SIP
IP-CS
IP-CS
TDE100/200
DSP DSP DSP
4
16
64
32
56
12
42
8
32
32
56
12
42
8
32
32
56
12
42
8
32
TDE600
DSP DSP DSP
4
16
64
32
56
12
42
8
32
32
56
12
42
8
32
32
56
12
42
8
32
[Restriction Key]
DSP
Power-1
Number of TDMIP Channels
Number of
Trunks
Number of
Handsets.
DSP
Power-2

17.

DECT-CS on NCP
The max. number of CS/PS.
CS
factor
KX-TDA0158
CS KX-TDA0141/0155
KX-NCP0158
Max. CS factor
Max. PS
2
1
2
Ver.2
Ver.4
NCP500 NCP1000 NCP500 NCP1000
2
4
3
5
4
8
7
11
6
8
16
16
12
16
32
32
64
64
64
64

18.

Network Feature Enhancement

19.

Network Feature Enhancement
The following features are newly supported from Ver.4
1 When calling extension in other PBX
- Leave Message Waiting
- Absent Message Display
- Called party name display before answer
2 When extension in other PBX is busy
- Call Waiting
- Busy Override
- Call Back
- Call Monitor
- Leave Message Waiting
3 When extension in other PBX is DND
- DND Override, DND tone and LCD
4 Incoming call from extension in other PBX
- Ring tone (Single or Double) as extension call
- Call Waiting
- Call FWD / DND as extension call
- Automatic answer as extension call
- Extension call block by COS-COS
5 Incoming call to extension in other PBX
- Directed Call Pickup

20.

Network Feature Enhancement - 1
Message Waiting
Ext.1001
A/K is needed
Call
Ext.2001
VoIP-Net
Free/Busy
1- Ext.1001 calls Ext.2001 (Free)
2- Ext.2001 does not answer.
3- Press “Message Waiting” button on Ext.1001.
4- The Message Waiting LED on Ext.2001 turns Red.
- Ext.2001 can call back to Ext.1001 press “Message Waiting” button.
1- Ext.1001 calls Ext.2001 (Busy)
2- Ext.1001 receive “Busy Tone”
3- Press “Message Waiting” button on Ext.1001.
4- The Message Waiting LED on Ext.2001 turns Red.
- Ext.2001 can call back to Ext.1001 press “Message Waiting” button.
The function works over, Extension Numbering & PBX Numbering.

21.

Network Feature Enhancement - 2
Absent Message Display
Ext.1001
1. Call
A/K is needed
2. Send “Go Home”
Ext.2001
VoIP-Net
Absent Message
1- Ext.1001 calls Ext.2001 (Absent Message “Go Home) “Go Home”
2- “Go Home” is displayed on Ext.1001.
Go Home
The function works over, Extension Numbering & PBX Numbering.

22.

Network Feature Enhancement - 3
Calling party name display before answer (Already Supported)
1. Call
Ext.2001
2. Send “Tanaka”
VoIP-Net
Ext.1001
Tanaka
A/K is needed
1001: Tanaka
Ver.4
Internal call
Tanaka
1001
Before Ver.4
External call
1- Ext.1001 (Tanaka) calls Ext.2001
2- Calling party name (Tanaka) is displayed on Ext.2001.
The function works over, Extension Numbering & PBX Numbering.

23.

Network Feature Enhancement - 4
Called party name display before answer
Ext.1001
1. Call
2. Send “Tanaka”
VoIP-Net
3. Send “Honda”
A/K is needed
Ext.2001
Honda
2001: Honda
1- Ext.1001 (Tanaka) calls Ext.2001
2- Calling party name (Tanaka) is displayed on Ext.2001.
3- Called party name (Honda) is displayed on Ext.1001.
The function works over, Extension Numbering & PBX Numbering.

24.

Network Feature Enhancement - 5
Call Wait
A/K is needed
3. Press “WAIT”
1. Call
2. Send “Busy” Info.
VoIP-Net
Call waiting : ON
Ext.2001
4.Call Wait
Ext.1001
Talking
1- Ext.1001 calls Ext.2001 (Busy)
2- Ext.1001
LCD
2001: Busy
WAIT OVER C.BCK
Ext.2002
3- Press “WAIT” button.
4- Call waiting on Ext.2001.
Call waiting (Ext.2001) has to be “ON”.
The function works over, Extension Numbering & PBX Numbering.

25.

Network Feature Enhancement - 6
Busy Override
A/K is needed
3. Press “OVER”
1. Call
2. Send “Busy” Info.
4. Override
Ext.2001
VoIP-Net
Ext.1001
Talking
1- Ext.1001 calls Ext.2001 (Busy)
2- Ext.1001
LCD
2001: Busy
WAIT OVER C.BCK
Ext.2002
3- Press “OVER” button.
4- We can override (Barge-in) the communication between Ext.2001
and 2002.
The function works over, Extension Numbering & PBX Numbering.

26.

Network Feature Enhancement - 7
Call Monitor
A/K is needed
Ext.1001
1. Call
2. Send “Busy” Info.
3. Press “5”
4. Monitor
Ext.2001
VoIP-Net
Talking
1- Ext.1001 calls Ext.2001 (Busy)
2- Ext.1001
LCD
2001: Busy
WAIT OVER C.BCK
Ext.2002
3- Press “5” button.
4- We can monitor the communication between Ext.2001 and 2002.
The function works over, Extension Numbering & PBX Numbering.

27.

Network Feature Enhancement - 8
Related program for Call Monitor/Busy Override
Ext.1001
Monitor/Busy Override
Ext.2001
Busy
VoIP-Net
Talking
Related program.
Ext.2002

28.

Network Feature Enhancement - 9
Related program for Busy Override
Ext.1001
Monitor/Busy Override
Ext.2001
VoIP-Net
Talking
Related program.
Ext.2002

29.

Network Feature Enhancement - 10
Call Back
3. Press “C.BAK”
1. Call
2. Send “Busy” Info.
Ext.2001
Busy
VoIP-Net
Ext.1001
Busy
1- Ext.1001 calls Ext.2001 (Busy)
2- Ext.1001
LCD
2001: Busy
WAIT OVER C.BCK
3- Press “C-BCK” button.
4- When Ext.2001 became idle, Ext.1001 starts ring. (Call back starts)
The function works over, Extension Numbering & PBX Numbering.

30.

Network Feature Enhancement - 11
DND
A/K is needed
3. Press “OVER”
1. Call
2. Send “DND” Info.
Ext.2001
Busy 4. Ring
VoIP-Net
Ext.1001
DND
1- Ext.1001 calls Ext.2001 (DND)
2- Ext.1001
LCD
We can see the
other end set to
“DND”
2001: Do Not Disturb
OVER
- “DND” Tone on Ext.1001
3- Press “OVER” button.
4- Ext.2001 starts ringing.
The function works over, Extension Numbering & PBX code Numbering.

31.

Network Feature Enhancement - 12
DND
3. Press “OVER”
1. Call
A/K is needed
2. Send “DND” Info.
Ext.2001
Busy 4. Ring
VoIP-Net
Ext.1001
Related program.
DND

32.

Network Feature Enhancement - 13
Ring tone (Single or Double) as extension call
Ext.1001
1. Call
A/K is needed
Ext.2001
Busy 2. Ring
VoIP-Net
1- Ext.1001 calls Ext.2001
2- Ext.2001 starts ringing.
Ver.4.0
: Internal call ring tone.
Before Ver.4.0
: External call ring tone.
The function works over, Extension Numbering & PBX code Numbering.

33.

Network Feature Enhancement - 14
Auto Answer
Ext.1001
1. Call
A/K is needed
Ext.2001
Busy
VoIP-Net
1- Ext.1001 calls Ext.2001
2- Ext.2001 answers the call automatically.
Ver.4.0
: Possible
Before Ver. 4.0 : No possible
Internal call
Auto Answer
= Enable
The function works over, Extension Numbering & PBX code Numbering.

34.

Network Feature Enhancement - 15
Call-FWD setting on Ext.2001
Ext.1001
Ext.2001
Busy
A/K is needed
Call
PBX-1
VoIP-Net
PBX-2
Call
Call
CO
Ext.2002
We can set different C-FWD destination on Ext.2001 for external calls
and other PBX call (Internal) calls.
E.g. Internal call destination: Call from Ext.1001 and Ext.2002
External call destination: Call from external (Through PBX-1)
The function works over, Extension Numbering & PBX code Numbering.

35.

Network Feature Enhancement - 16
Pick up call (Direct call pick up)
Ext.1001
3. Pick up
Ext.2001
2. Ring
VoIP-Net
1- Ext.2002 calls Ext.2001
2- Ext.2001 starts ringing.
3- Ext.1001 can pick up the call on Ext.2001
How to program ?
1.Call
Ext.2002
The function works over, Extension Numbering and PBX numbering.

36.

Network Feature Enhancement - 17
Pick up call (Direct call pick up): Extension Numbering
Ext.1001
3. Pick up (Press a DSS (20**412001)
Ext.2001
2. Ring
VoIP-Net
Access code
1.Call
Ext. No
20**412001
DSS
The target PBX numbering plan + *
*40 (Pick-up by group number) does not support
A/K is needed

37.

Network Feature Enhancement - 18
Pick up call (Direct call pick up): PBX Numbering
Ext.1001
3. Pick up (Press a DSS (72*411001)
PBX
code
1
VoIP-Net
Access code
Ext.1001
2. Ring
PBX
code
2
1.Call
Ext. No
72*411001
TIE access + PBX number
DSS
A/K is needed

38.

Network Feature Enhancement - 19
Pick up call (Direct call pick up): CA Ver.3 (Future Plan)
Ext.2001
2. Ring
3. Pick up
VoIP-Net
Ext.1001
1.Call
CA Ver.3
CA Server
Ext.2002
Monitor
A/K is needed

39.

Network Feature Enhancement - 20
Paging with Pick up call (Direct call pick up)
Ext.2001
3. Pick up
PBX-1
VoIP-Net
PBX-2
Ext.1001
2. Paging
Ofiice-1
Ofiice-2
1.Call
Ext.2002 is a PBX-2 extension.
Audio
port
Ext.2002
1- Ext.2001 calls Ext.2002
2- On Ext.2002 (Voice Call is available ➔ Paging)
3- Ext.1001 can pick up (72*412002) the call on Ext.2002 A/K is needed

40.

Network Feature Enhancement - 21
Improved Boss/Secretary function
Ext.1001
Call Ext.1001
Ext.2001
VoIP-Net
Boss
(C-FWD to Ext.2001)
Secretary
When Ext.2001 calls Ext.1001.
Ver.4.0
: Ext.1001 starts ring.
Before Ver.4.0 : Busy Tone
A/K is needed
The function works over, Extension Numbering & PBX code Numbering.

41.

Network Feature Enhancement - 22
Internal call Block (COS-COS setting)
Call
COS Information
VoIP-Net
Ext.1001
COS-1
Call
Block
A/K is needed
Ext.2001
COS-1
Ext.1002
COS-2
Ext.1001 (COS-1) calls Ext.2001 (COS-1): Not Blocked
Ext.1002 (COS-2) calls Ext.2001 (COS-1): Blocked
The function works over, Extension Numbering & PBX code Numbering.

42.

Network Feature Enhancement - 23
Auto answer enable/disable by COS
Call
COS Information
Ext.2001
VoIP-Net
Ext.1001
COS-2
Ext.1002
COS-3
Auto Answer=ON
Calling Ext.
Ext.2001
Ext.1001 (COS-2) Auto Answer
Ext.1002 (COS-3) Ringing
A/K is needed

43.

Auto answer enable/disable by COS
Internal call works this feature
Ext.2001
VoIP-Net
Ext.1001
Auto Answer=ON
Calling Ext.
Ext.2001
Ext.2002 (COS-1) Auto Answer
Ext.2003 (COS-3) Ringing
Ext.1001 (COS-2) Auto Answer
Ext.1002 (COS-3) Ringing
Ext.1002
Ext.2002
COS-1
Call
Ext.2003
COS-3

44.

Network ICD-Group

45.

Network ICD-Group
Before Ver.4.
Ext.2001
CO
VoIP-Net
Call
ICD-Group
Ext.1001
Ext.1002
Virtual PS
Ext.1003
C-FWD = 2002
Ext.2002
ICD-Group
Ext.1000
Ring

46.

Network ICD-Group
Ver.4.
Ext.2001
CO
VoIP-Net
Call
ICD-Group
Ext.1001
Ext.1002
Virtual PS
Ext.1003
C-FWD = 2002
Ext.2002
ICD-Group
Ext.1000
Ring (Already Supported)
UCD (Ver.4)
Hunt (Ver.4)
Note: Automatic Log-out is not support for Virtual PS.

47.

Improved Conference Group
Function

48.

Improved Conference Group Function - 1
Conference Group mode programming
Ver.4: Flexible Program
Before Ver.4: System Program

49.

Improved Conference Group Function - 2
Conference Group mode programming (Ver.4)
Group-1: 8-Party Conference Mode
Owner
Two-way
One way
N/A
Group-2: Broadcast
Owner
Two-way
One way
N/A
Total
32 Terminals
Group-8: 8-Party Conference Mode
Owner
Two-way

50.

Improved Conference Group Function - 3
Joining external participants
Before Ver.4
Owner
Conference Group
Before a conference is established, the external participant cannot
join.
Owner
Conference Group
If an owner wants to have a conference with only external
participants. ➔ How to achieve ?

51.

Improved Conference Group Function - 4
Joining external participants
Ver.4
Auto Answer mode works for conference group call on Ver.4.
Advise solution
Owner
Conference Group
1. Call
3. Join
2. Conference
is established.
4. Cuts the DPT.
D-PT or Softphone
Auto Answer = ON
- An owner establishes a group conference with physical connection DPT or Softphone.
- An external participant joins the conference.
- The owner presses the DSS button of the D-PT twice.
- Press “Flash”/”Recall” key.
➔ Cuts the D-PT from the conference.

52.

Improved Conference Group Function - 5
Reserve Bit Function (0A-6)
Default (Disable)
This is PSN plan
Owner
Conference Group
Call
Auto Answer = OFF
0A-6=Disable
A D-PT (Auto Answer = Off) in conference group:
An owner establishes a group conference
➔ Compulsory D-PT Auto answer function Enable.
0A-6=Enable
The above function does not work.

53.

Improved Conference Features

54.

Improved Conference Features - 1
Before Ver.4 Function
Ext.1001
Subscriber-A
Owner
CO
Subscriber-B
Three party conference.
1- Ext.1001 (Owner) holds three party conference.
Subscriber- A, Subscriber-B
2- Ext.1001 on-hooks ➔ All connection disconnects.
Customer wants to keep CO-to-CO
connection.

55.

Improved Conference Features - 2
Ver.4 New Option
CO-CO call Limitation
Enable : Default (Before Ver. 4 New function)
Disable : Option (Ver. 4 New function)

56.

Improved Conference Features - 3
Ver.4 Function (CO-CO call Limitation = Disable)
1. Ext.1001 (Owner) holds three party conference.
Ext.1001
Subscriber-A
CO
Owner
Subscriber-B
2. Ext.1001 on-hooks.
3. The PBX is keeping CO-to-CO connection.
Ext.1001
Subscriber-A
CO
Owner
Subscriber-B
NB: This operation does not work for conference group call.

57.

Improved Conference Features - 4
Working scenario
Subscriber-A
Ext.1001
CO
Owner
1- Ext.1001 (Owner) holds three party conference.
Subscriber- A and Ext.1002.
Ext.1002
2- Ext.1001 on-hooks ➔ The PBX keeps Subscriber- A and Ext.1002
connection.

58.

Improved Conference Features - 5
Working scenario
Ext.1001
Subscriber-A
Owner
CO
VoIP-Net
1- Ext.1001 (Owner) holds three party conference. Ext.1002
Subscriber- A and Ext.1002.
2- Ext.1001 on-hooks ➔ The PBX keeps CO to Ext.1002 call.

59.

Improved Conference Features - 6
Working scenario
Ext.1001
Owner
VoIP-Net
Ext.1002
Ext.1003
1- Ext.1001 (Owner) holds three party conference.
Ext.1002 and Ext.1003.
2- Ext.1001 on-hooks ➔ The PBX keeps Ext.1002 to Ext.1003 call.

60.

Improved Conference Features - 7
Not working scenario
Subscriber-A
Ext.1001
CO
Subscriber-B
1- Ext.1001 (Owner) holds four party conference.
Subscriber- A, Subscriber-B and Ext.1002.
Ext.1002
2- Ext.1001 on-hooks ➔ All connections disconnect.
Owner

61.

Paging to DECT
(by using auto answer/conference)

62.

Paging to DECT - 1
Auto-answer function for DECT
Ext.2001
2. Call
AutoAnswer=ON
1.Call Ext.2001
Ext.1001
3. Speaker
automatically ON
1. Ext.1001 calls Ext.2001 (Auto-Answer=ON)
2. The PBX calls Ext.2001
3. Ext.2001 speaker phone automatically ON.
Auto-answer function also works a conference group call.

63.

Paging to DECT - 2
Auto-answer function for Conference Group
Conference Group No.1
Ext.2001 Ext.2002 Ext.2003
2. Call
1.Dial *321#
Ext.1001
AutoAnswer=ON
4. Paging
3. Speaker
automatically ON
1. Ext.1001 holds a conference (*321#)
2. The PBX calls pre-programmed DECT-PS
3. All DECT PS on the conference group automatically answer.
Speaker phone automatically “ON”.
4. Ext.1001 user can page.

64.

Paging to DECT - 3
Conference Group No.1
Ext.2001 Ext.2002 Ext.2003
Ext.1001
AutoAnswer=ON
- DECT user and SLT user can make conference group call as well as
PT user.
- Hand over is supported for conference group call after DECT
answers.
(Ver. 3 does not support hand over for conference group call.)
- One DECT-PS needs one wireless channel.
Broadcasting mode
Enable
Disable
Max. member


32
8
Max.
When paging starts,
talker
8
DECT-PS cannot speak at first.
8
DECT-PS speak at first.

65.

Paging to DECT - 4
Reserve Bit Function (0A-7)
Default (Disable)
This is PSN plan
Owner
Conference Group
Call
Auto Answer = Off
0A-7=Disable
A PS (Auto Answer = Off) in conference group:
An owner establish a group conference
➔ Compulsory PS Auto answer function Enable.
0A-7=Enable
The above function does not work.

66.

Call-FWD CLIP

67.

Call-FWD CLIP - 1 (Internal call)
Subscriber-A
CLIP ?
ISDN
1- Ext.1000 calls Ext.1001
2- The call is re-routed to subscriber-A.
3- CLIP? Ext.1000 CLIP or Ext.1001 CLIP?
The PBX sends 477-1001 as CLIP
The PBX sends 477-1000 as CLIP
Ext.1000
CLIP 477-1000
Calls
Ext.1001
CLIP 477-1001
C-FWD to
Subscriber-A

68.

Call-FWD CLIP - 2 (Internal call)
Subscriber-A
CLIP ?
Ext.1000
CLIP 477-1000
ISDN
1- Ext.1000 calls Ext.6000 (ICG-D)
2- The call is re-routed to subscriber-A.
3- CLIP? Ext.1000 CLIP or Ext.2000 CLIP?
Calls ICD-G 6000
Dummy
PS
Ext.2000
CLIP 477-2000
C-FWD to
Subscriber-A
Ext.1001
The PBX sends 477-2000 as CLIP
The PBX sends 477-1000 as CLIP

69.

Call-FWD CLIP - 3 (External call)
Subscriber-A
ISDN
Subscriber-B
1- Subscriber-A calls Ext.1000
2- The call is re-routed to subscriber-B
3- CLIP? Subscriber-A CLIP or Ext.1000 CLIP?
The PBX sends 477-1000 as CLIP
The PBX sends Subscriber-A CLIP as CLIP
Ext.1000
CLIP 477-1000
C-FWD to
Subscriber-B

70.

Call-FWD CLIP - 4 (External call)
ICD-G 6000
Subscriber-A
Ext.1000
CLIP 477-1000
ISDN
Subscriber-B
Dummy
PS
1- Subscriber-A calls Ext.6000 (ICG-D)
2- The call is re-routed to subscriber-B
3- CLIP? Subscriber-A CLIP or Ext.2000 CLIP?
The PBX sends 477-1000 as CLIP
The PBX sends Subscriber-A CLIP as CLIP
Ext.2000
CLIP 477-1000
C-FWD to
Subscriber-B

71.

Improved Centralized VM
Function

72.

Improved Centralized VM function - 1
VM transfer over network
Ext.2001
PBX-1
CO
VoIP-Net
PBX-2
1. Call
2. Press “VTR
+ 2001+#
3. Go to Ext. 2001
Mail BOX
Ext.1001
Ext.2002
Mail-BOX
Ext.
101
1001 (PBX-1)
102
2001 (PBX-2)
103
2002 (PBX-2)
Centralized VM
1. Ext.1001 receives a call.
2. Press the “VTR” button and dial remote extension number + #.
3. The call goes to Ext.2001 mail Box.

73.

Improved Centralized VM function - 2
VM transfer over network
PBX-1
CO
2. Press “VTR
+ 1001 + #
VoIP-Net
Ext.2001
PBX-2
1. Call
3. Go to Ext. 1001
Mail BOX
Ext.1001
Ext.2002
Mail-BOX
Ext.
101
1001 (PBX-1)
102
2001 (PBX-2)
103
2002 (PBX-2)
Centralized VM
1. Ext.2001 receives a call.
2. Press the “VTR” button and dial remote extension number + #.
3. The call goes to Ext.1001 mail Box.

74.

Improved Centralized VM function - 3
VM transfer over network
PBX-1
CO
2. Press “VTR +
NDSS Button
VoIP-Net
Ext.2001
PBX-2
1. Call
NDSS (Ext.1001)
3. Go to Ext. 1001
Mail BOX
Ext.1001
Ext.2002
Mail-BOX
Ext.
101
1001 (PBX-1)
102
2001 (PBX-2)
103
2002 (PBX-2)
Centralized VM
1. Ext.2001 receives a call.
2. Press the “VTR” button and Press the NDSS button for Ext.1001.
3. The call goes to Ext.1001 mail Box.

75.

Improved Centralized VM function - 4
Transfer re-call Destination
Ext.2001
PBX-1
CO
VoIP-Net
PBX-2
1. Call
2. Transfer to
Ext.1002
Un-screened
Ext.1001
3. Does not
answer
Ext.1002
C-FWD N/A to VM
Centralized VM
Mail-BOX
Ext.
101
1001 (PBX-1)
102
1002 (PBX-1)
103
2001 (PBX-2)
Step 4.
Before Ver.4 Transfer re-call to Ext.1001
Ver.4
The call is re-routed to the Centralized VM

76.

Improved Call-FWD N/A
Function

77.

Improved Call-FWD N/A Function - 1
C-FWD N/A function before Ver.4
Ext.2001
Subscriber-A
2. Ring.
CO
3. Fwd to Subscriber-A
Call-FWD N/A to
Subscriber-A
N/A Timer=15sec
1. Call
Ext.2002
1. Ext.2002 calls Ext.2001
2. Ext.2001 starts ringing, 15sec.
3. The call is forwarded to the subscriber-A ➔ Ext.2001 stops ringing.

78.

Improved Call-FWD N/A Function - 2
C-FWD N/A function Ver.4
Ext.2001
Subscriber-A
2. Ring.
CO
3. Fwd to Subscriber-A
Call-FWD N/A to
Subscriber-A
N/A Timer=15sec
1. Call
1. Ext.2002 calls Ext.2001
2. Ext.2001 starts ringing, 15sec.
3. The call is forwarded to the subscriber-A
A/K is needed
Keep ring after FWD NA to CO
Enable ➔ Ext.2001 keeps ringing.
Ext.2002
Disable ➔ Ext.2001 stops ringing.
4. The subscriber-A and Ext.2001 can answer the call.

79.

Improved Call-FWD N/A Function - 3
C-FWD N/A function Ver.4
Ext.2001
Subscriber-A
2. Ring.
CO
3. Fwd to Subscriber-A
The Keep ring after FWD NA to CO
Function is available on the following CO
CO Type
Available
SIP/H.323 G/W
YES
ISDN
YES
Analogue
W/ Reverse
W/O Reverse
CPC Analogue Line
E1
T1
LCO
GCO/DID/E&M
YES
NO
NO
YES
NO
YES
Call-FWD N/A to
Subscriber-A
N/A Timer=15sec
1. Call
Ext.2002

80.

Improved Call-FWD N/A Function - 4
C-FWD N/A function Ver.4
Ext.2001
Subscriber-A
2. Ring.
CO
3. Fwd to Subscriber-A
Call-FWD N/A to
Subscriber-A
N/A Timer=15sec
1. Call
If Ext.2001 DSS is assigned on other Ext.
1. Ext.2002 calls Ext.2001 ➔ DSS flashing.
2. 15 sec ➔ DSS flashing.
Ext.2002
3. The call is forwarded to the Subscriber.
4. The Subscriber does not answer ➔ DSS flashing.
5. The Subscriber answers ➔ DSS turns “Red”.
Ext.2001
This situation differs from the usual DSS display.
Actually, Ext.2001 is not busy, other extension can call to Ext.2001.

81.

Improved Call-FWD N/A Function - 5
C-FWD N/A function Ver.4
Ext.2001
2. Ring.
If Ext.2001 is set C-FWD to Internal.
1. Ext.2002 calls Ext.2001
2. Ext.2001 starts ringing, 15sec.
3. The call is forwarded to Ext.2003
4. Ext.2001 stops ringing.
Call-FWD N/A
Ext.2003
N/A Timer=15sec
1. Call
Ext.2002
3. Fwd to Ext.2003
Ext.2003

82.

Improved CA integration

83.

Improved CA integration
Send system data to CA
When CA user logs to PBX (Ver.4), the PBX send “Manager” and “CA Chat
Ability” information to CA.
2. Data
1. Log-in
CA
Client-1
Disable manager function
from basic CA client
Disable un-necessary chat
Support from CA Ver.3

84.

Improved CA integration
Absent Message is not automatically changed.
Before Ver.4
Absent status is displayed
automatically by CA when PC
is not used for pre
programmed time.
Not in used
CA
Display changed
Customer does not
like this change.
10 JUN. 09:40
THU
THU 09:40 - *
PROG INFO RING MENU
PROG INFO RING MENU
Ver.4
Absent status is not displayed from Ver.4.

85.

Alternative call if VoIP call is fails
(CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ CO call)

86.

Alternative call if VoIP call fails - 1
Standalone system
+44 (0)111-2222
Telephone cost are high.
PBX-Japan
NTT-CO
0-00-44-111-2222
Dials
0-00-44-111-2222
Subscriber No.
Country code
International access code
CO access code
BT CO

87.

Alternative call if VoIP call fails - 2
+44 (0)111-2222
Using remote PBX and VoIP and ARS function
Save cost !!!
PBX-Japan
NTT-CO
BT CO
01112222
ARS=ON
VoIP Net
80201112222
TG-2
PBX-UK
Modify the dialled
number by ARS table.
Dials
0-00-44-111-2222

88.

Alternative call if VoIP call fails - 3
+44 (0)111-2222
Using remote PBX and VoIP and ARS function
If VoIP Network is Down ?
PBX-Japan
NTT-CO
BT CO
ARS=ON
VoIP Net = Down
80201112222
TG-2
PBX-UK
Modify the dialled
number by ARS table.
Dials
0-00-44-111-2222

89.

Alternative call if VoIP call fails - 4
+44 (0)111-2222
Using remote PBX and VoIP and ARS function
Modify the dialled number
by Quick Dial table.
A new function from Ver.4.
PBX-Japan
NTT-CO
BT CO
ARS=ON
801-00-44-111-2222
Noresponse
VoIP Net = Down
80201112222
TG-2
PBX-UK
Modify the dialled
number by ARS table.
Checks Quick
Dialling table
The call is
VoIP call ?
NO
YES
Re-order Tone
Dials
0-00-44-111-2222

90.

Alternative call if VoIP call fails - 5
Programming
ARS
Select “On for Local Access Operation”
Please do not select “On for any CO
Access Operation”
Modify the dialled
number by ARS table.

91.

Alternative call if VoIP call is failed - 6
Programming
Quick Dial
Need to Check
Trunk access No.
CO access No.

92.

Alternative call if VoIP call fails - 7
Reserve Bit Function (09-6)
Default (Disable)
From TDE/NCP V4.
The alternative call function on Ver.4.
CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ CO call
09-6=Disable
The alternative call function works.
CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ CO call
09-6=Enable
The alternative call function does not work.
CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ Re-order tone

93.

Improve VoIP (H.323)
Connection

94.

Improve VoIP (H.323) Connection - 1
Support Non-Fast Connect
H323 IP-G/W
Virtual H323 IP-G/W
Call
VoIP Net
Call
Receiving call (a non-Fast connect mode call):
Before Ver.4 : PBX does not accept the call.
Ver.4
: PBX accepts the call.
This improvement is adapted only for virtual gate way.
(Not for LPR card gate way)

95.

Improve VoIP (H.323) Connection - 2
Support Non-Fast Connect
H323 IP-G/W
Virtual H323 IP-G/W
Call
VoIP Net
2. Reply
1. Call
3. Connection?
Making call:
The TDE/NCP makes a call with fast connection mode.
The other PBX replies with non fast connection mode.
Before Ver.4 : PBX does not accept this reply, disconnect the call.
Ver.4
: PBX accepts this reply
This improvement is adapted only for virtual gate way.
(Not for LPR card gate way)

96.

Improve VoIP (H.323) Connection - 3
Support Non-Fast Connect
H323 IP-G/W
Virtual H323 IP-G/W
Call
VoIP Net
2. Reply
1. Call
3. H.245 Negotiation
Making call:
The TDE/NCP makes a call with fast connection mode.
The other PBX replies with non fast connection mode.
Before Ver.4 : PBX does not accept this reply, disconnect the call.
Ver.4
: Support H.245 Negotiation.
This improvement is adapted only for virtual gate way.
(Not for LPR card gate way)

97.

Improve VoIP (H.323) Connection - 4
Reserve Bit Function (06-0): H323-ID registration
Default (Disable)
Gate Keeper
Registration
H323 G/W
LAN
06-0=Disable
The H323-ID registration is not possible.
06-0=Enable
The H323-ID registration is possible. (TDE Ver.2)
The PBX send “Zonename” information to the Gate keeper. (Ver.4)
The PBX send “Band Wide” information to the Gate keeper. (Ver.4)

98.

Other Improvements

99.

Other Improvements
BSS Operation Programming
Before Ver.4 (System Program)
Ver.4 (COS setting)
Ext.1001 (Operator: COS-1) Mainly un-screened call transfer.
Ext.1002 (Worker: COS-2) Mainly screened call transfer.

100.

PC Maintenance Console
(PCMC) for Ver.4.

101.

PCMC for KX-TDE/NCP Ver.4.
Please use U-PCMC Ver. 6.x.x.x
KX-TDE600
Ver. 6.0.x.x or later
KX-NCP500/1000 Ver. 6.1.x.x or later
KX-TDE100/200 Ver. 6.2.x.x or later

102.

Thank You Very Much
For Your Attention

103.

Modification History
➔ Edition-2
Page-11
Page 72 TVR ➔ VTR
Add Page 79
Page 81 CS ➔ CA
Page 14
Ext.2001 ➔ Ext.2002
72*412001 ➔ 72*412002
CO-to-CO call ➔ CO to Ext.1002 call.
CO-to-CO call ➔ Ext.1002 to Ext.1003 call.
4. Ext.2003 does not answer the call and the call is re-routed to VM.
➔ The call is re-routed to VM.
➔ Edition-4
Add Page 73.
Page 34
Page 39
Page 58
Page 59
Page106

104.

➔ Edition-5
Page-51 : (Old) - The owner presses the DSS button of the D-PT.
(New) - The owner presses the DSS button of the D-PT twice.
- Press "Flash"/"Recall" key.
Page-55 : (Old) CO-CO call Limitation
Enable : Default (Ver. 4 New function)
Disable : Option (Before Ver. 4 New function)
(New) CO-CO call Limitation
Enable : Default (Before Ver. 4 New function)
Disable : Option (Ver. 4 New function)
Page-56: (Old) Ver.4 Function (CO-CO call Limitation = Enable)
(New) Ver.4 Function (CO-CO call Limitation = Disable)
Page-72 : (Old) 2. Press “VTR + 2001 ➔ (New) 2. Press “VTR + 2001+#
Page-74 : Add.
Page-81 : (Old) If Ext.2001 is set C-FWD to External.
(New) If Ext.2001 is set C-FWD to Internal.
➔ Edition-6
Page-2, 20-26,30-34, 36-39, 41-42. Add: A/K is needed
➔ Edition-7
Page-40 Add: A/K is needed
English     Русский Правила