26180 Mold Problems and Solutions

1.

26180 Problem and solution
www.mould-tip.com
1

2.

• Problems
1. The weight is too heavy, the
top side thickness is too thick.
2. The thickness of rings is
different.
3.Apperance problem.
www.mould-tip.com
2

3.

• Reason and solution
Problem 1
Reason: The core got
down.
Solution
We added the gasket
www.mould-tip.com
3

4.

• Reason and solution
Problem 2
The ring 3D drawing size is 0.3mm
Your samples 0.28-0.31mm
P&C samples 0.29-0.31mm
The difference is small, please check
the attached video.
And we checked with your cutting
supplier, it’s better to keep it to same
as 0.3mm. And we can reduce the
part weight by changing the top side
thickness.
www.mould-tip.com
4

5.

• Reason and solution
Appearance
Solution
1. We will adjust the
parameter sheet
2. And we will make the
texture, it will be better.
Testing time: We already modified the mould, and we can test the mould
on 11st Sep.
www.mould-tip.com
5