6.15-Customer replied- Response-Cap and button modification plan-6.10 - (2)

1.

TOOLING FEASIBILITY REPORT
Design for Manufacturing

2.

TOOLING FEASIBILITY REPORT
- Part dimensions2
6.15 客户回复 同意按照我们的方案
6.10-Why only one way?
Why not evenly in two
directions?
减胶0.12mm
Reduce plastic 0.12mm
减胶0.18mm
reduce plastic 0.18mm
减胶0.19mm
reduce plastic 0.19mm
减胶0.22mm
reduce plastic 0.22mm
6.11 -HLH response:
1. We can do in two directions but
it will easily make the thickness
uneven and takes more time. But
please note the thickness need to
be modified is too small. So the
appearance will be almost the
same reducing from one direction.
2. Just the area in red,just this
direction need to modify,
thickness is OK in the other
direction.
6.10客户回复 能不能从2个方向同时
减胶
涂红色面减胶
Reduce plastic on the red face (details please see above),OK?
请确认

3.

TOOLING FEASIBILITY REPORT
- Part dimensions3
good decision
OK
it is important to choose the right diameter of
the guide cylinders so that the buttons move
freely and do not jam
OK, great
6.10 客户回复 同意 这个方案很好
这个方案重要的是要选择正确直径的柱子
使得按钮可以自有移动但是不会卡住
加定位柱子
Add boss to fix the assembly position,ok?
请确认

4.

TOOLING FEASIBILITY REPORT
- Part dimensions此处不同意改0.2MM 的原因是什么
我方建议这样改 增加弹性 按钮作用
加柱子作用是为了改正变形的问题
客户回复
加胶 上图Cap 部件得同样去掉0.3MM胶料。 但是一
保持尺寸2MM 不能变 是否可以
4
6.15 客户回复 不同意加胶0.3MM,
原因 1.客户的客户要求 2. SUIK.741512.006
Button block 也要修改
if we add material here, then we will have to
remove the same 0.3 mm on the caps look at the
picture - the size of 2 mm must remain
unchanged !!!
涂红色加胶0.3mm及定位孔位
6.11-HLH response:
According to the current samples
test, we think add plastic 0.3mm
can the button works better. We
will not modity it if you
absolutely can’t change the size
of 2. Can you tell us why you
can’t change the size of 2MM
here?
Increase plastic 0.3mm on the face in red and add holes
for fixing position,OK?
请确认