C2 Touch screen instructions to update the firmware

C2 Touch screen instructions to update the firmware Touchscreen Driver IC firmware used on the burn are generally three ways: 1.

Single IC recorder with a particular fixture;

2.TP finished programming the firmware via the interface using a jig;

3.

Machine can be upgraded via firmware APK.

The machine is upgraded via APK update farmware is the most convenient way, but only on condition that TP able to operate, meet the basic conditions of use.

1.

C2APK update farmware through the whole project, follow these steps: First, install the supplied APK Zhuopu C2Touch screen instructions to update the firmware 2.

After installation open it, this time need to focus first determine the current use of mobile phones TP VID address, there are two TP, TP VID addresses are 0X98 And OX5b C2Touch screen instructions to update the firmware 3.

Distinguish between good TP VID will correspond to the firmware (mainly to see the file name, such as: C2_0x98_V12.bin or C2_0x5b_V14.bin) copy to the local phone memory or TF card root directory, and then re-open the APK ------ "open file "to import the copy to the appropriate memory TP firmware file, follow these steps: C2 Touch screen instructions to update the firmware TP firmware upgrade in accordance with V11, V12, V13 ......

and so on;

Version Naming: Model _TP VID_ version.

C2 Touch screen instructions to update the firmware Firmware upgrade file Additional information: Currently there are four versions of TP, which corresponds to TP VID is OX5b the only one;

TP VID is 0X98 or 0X78 corresponding three.

TP VID is 0X5b corresponding version named for the V10, V11, V12 ...

TP VID is 0X98 or 0X78 corresponding version naming There are three ways to distinguish the corresponding firmware: 1.V10, V11, V12 ...

2.Va0, Va1, Va2 ...

3.

Vb0, Vb1, Vb2 ...

TP VID corresponds to 0X98 or 0X78 APK firmware version must be read out and naming the previous version.

Such as: 1.

Corresponding version: C2_0X5b_V15 (V16 ...).

Bin C2Touch screen instructions to update the firmware2.3.4.

Corresponding version: C2_0X98_V13 (V14 ...).

Bin Corresponding version: C2_0X98_Vb1 (Vb2 ...).

Bin Corresponding version: C2_0X98_Va0 (Va1 ...).

Bin C2 Touch screen instructions to update the firmware Tips: Be sure to check the good before the upgrade version, the upgrade process do not touch the TP and the phone placed to maintain a direction until the upgrade is complete.

Doing so may cause the upgrade to fail or touch unusual problem.

The upgrade and the firmware