Chapter 13: I/O Systems- 6th ed
I/O Hardware
A Typical PC Bus Structure
Device I/O Port Locations on PCs (partial)
Polling
Interrupts
Interrupt-Driven I/O Cycle
Intel Pentium Processor Event-Vector Table
Direct Memory Access
Six Step Process to Perform DMA Transfer
Application I/O Interface
A Kernel I/O Structure
Characteristics of I/O Devices
Block and Character Devices
Network Devices
Clocks and Timers
Blocking and Nonblocking I/O
Kernel I/O Subsystem
Sun Enterprise 6000 Device-Transfer Rates
Kernel I/O Subsystem - (continued)
Error Handling
Kernel Data Structures
UNIX I/O Kernel Data Structure
Mapping I/O Requests to Hardware Operations
Life Cycle of An I/O Request
STREAMS (?)
The STREAMS Structure
Performance sect 13.7
Intercomputer Communications- omit for now
Device-Functionality Progression
804.00K

Chapter 13: I/O Systems- 6th ed I/O Hardware Application I/O Interface Kernel I/O Subsystem

1. Chapter 13: I/O Systems- 6th ed

I/O Hardware
Application I/O Interface
Kernel I/O Subsystem
Transforming I/O Requests to Hardware Operations
Streams
Performance
Review Chapters 2 and 3, and instructors notes on:
“Interrupt schemes and DMA”
This chapter gives more focus to these chapters and topics.
Instructor’s annotations in blue
Updated 12/5/03
Operating System Concepts
13.1
Silberschatz, Galvin and Gagne 2002

2. I/O Hardware

Incredible variety of I/O devices
Common concepts
Port - basic interface to CPU - status, control, data
Bus (daisy chain or shared direct access) - main and
specialized local (ex: PCI for main and SCSI for disks)
Controller (host adapter) - HW interface between Device
and Bus - an adapter card or mother board module
Controller has special purposes registers (commands,
etc.) which when written to causes actions to take place
- may be memory mapped
I/O instructions control devices - ex: in, out for Intel
Devices have addresses, used by
Direct I/O instructions - uses I/O instructions
Memory-mapped I/O - uses memory instructions
Operating System Concepts
13.2
Silberschatz, Galvin and Gagne 2002

3. A Typical PC Bus Structure

Operating System Concepts
13.3
Silberschatz, Galvin and Gagne 2002

4. Device I/O Port Locations on PCs (partial)

Various ranges for a device includes both control and data ports
Operating System Concepts
13.4
Silberschatz, Galvin and Gagne 2002

5. Polling

Handshaking
Determines state of device
command-ready
busy
Error
Busy-wait cycle to wait for I/O from device
When not busy - set data in data port, set command
in control port and let ‘er rip
Not desirable if excessive - since it is a busy wait
which ties up CPU & interferes with productive work
Remember CS220 LABs
Operating System Concepts
13.5
Silberschatz, Galvin and Gagne 2002

6. Interrupts

CPU Interrupt request line (IRQ) triggered by I/O device
Interrupt handler receives interrupts
Maskable to ignore or delay some interrupts
Interrupt vector to dispatch interrupt to correct handler
Based on priority
Some unmaskable
Interrupt mechanism also used for exceptions
Application can go away after I/O request, but is til
responsible for transferring data to memory when it
becomes available from the device.
Can have “nested” interrupts (with Priorities)
See Instructors notes: “Use of Interrupts and DMA”
Soft interrupts or “traps” generated from OS in
system calls.
Operating System Concepts
13.6
Silberschatz, Galvin and Gagne 2002

7. Interrupt-Driven I/O Cycle

Go away & do
Something else ==>
Operating System Concepts
13.7
Silberschatz, Galvin and Gagne 2002

8. Intel Pentium Processor Event-Vector Table

Interrupts 0-31 are non-maskable - cannot be disabled
Operating System Concepts
13.8
Silberschatz, Galvin and Gagne 2002

9. Direct Memory Access

With pure interrupt scheme, CPU was still
responsible for transferring data from controller to
memory (on interrupt) when device mad it available.
Now DMA will do this - all CPU has to do is set up
DMA and user the data when the DMA-complete
interrupt arrives. … Interrupts still used - but only to
signal DMA Complete.
Used to avoid programmed I/O for large data movement
Requires DMA controller
Bypasses CPU to transfer data directly between I/O
device and memory
Cycle stealing: interference with CPU memory
instructions during DMA transfer. - DMA takes priority
- CPU pauses on memory part of word.
Operating System Concepts
13.9
Silberschatz, Galvin and Gagne 2002

10. Six Step Process to Perform DMA Transfer

Operating System Concepts
13.10
Silberschatz, Galvin and Gagne 2002

11. Application I/O Interface

The OS software interface to the I/O devices (an API
to the programmer)
Attempts to abstract the characteristics of the many
I/o devices into a few general classes.
I/O “system calls” encapsulate device behaviors in
generic classes
Device-driver layer hides differences among I/O
controllers from kernel
Devices vary in many dimensions
Character-stream or block
units for data transfer bytes vs blocks
Sequential or random-access - access methods
Synchronous (predictable response times) vs
asynchronous (unpredictable response times)
Sharable or dedicated - implications on deadlock
Speed of operation - device/software issue
read-write, read only, or write only - permissions
Operating System Concepts
13.11
Silberschatz, Galvin and Gagne 2002

12. A Kernel I/O Structure

System calls ==>
… “user” API
==>
Example: ioctl(…)
generic call
(roll your own)
in UNIX (p. 468),
and other more
specific
commands or calls
open, read, ...
Fig. 13.6
Operating System Concepts
13.12
Silberschatz, Galvin and Gagne 2002

13. Characteristics of I/O Devices

Device driver must deal with these at a low level
Use of I/O buffering
Operating System Concepts
13.13
Silberschatz, Galvin and Gagne 2002

14. Block and Character Devices

Block devices include disk drives
example sectors or sector clusters on a disk
Commands/calls include read, write, seek
Access is typically through a file-system interface
Raw I/O or file-system access - “binary xfr” of file data - interpretation
is in application (personality of file lost)
Memory-mapped (to VM) file access possible - use memory instructions
rather than I/O instructions - very efficient (ex: swap space for disk).
Device driver xfr’s blocks at a time - as in paging
DMA transfer is block oriented
Character devices include keyboards, mice, serial ports
Device driver xfr’s byte at a time
Commands include get, put - character at a time
Libraries layered on top allow line editing - ex: keyboard input
could be beefed up to use a line at a time (buffering)
Block & character devices also determine the two general device
driver catagories
Operating System Concepts
13.14
Silberschatz, Galvin and Gagne 2002

15. Network Devices

Varying enough from block and character to have own
interface - OS makes network device interface distinct
from disk interface - due to significant differences
between the two
Unix and Windows NT/9i/2000 include socket interface
Separates network protocol from network operation
Encapsulates details of various network devices for
application … analogous to a file and the disk???
Includes select functionality - used to manage and access
sockets - returns info on packets waiting or ability to accept
packets - avoids polling
Approaches vary widely (pipes, FIFOs, streams, queues,
mailboxes) … you saw some of these!
Operating System Concepts
13.15
Silberschatz, Galvin and Gagne 2002

16. Clocks and Timers

Provide current time, elapsed time, timer
If programmable, interval time used for timings, periodic
interrupts
ioctl (on UNIX) covers odd aspects of I/O such as
clocks and timers - a back door for device driver
writers (roll your own). Can implement “secret” calls
which may not be documented in a users or
programming manual
Operating System Concepts
13.16
Silberschatz, Galvin and Gagne 2002

17. Blocking and Nonblocking I/O

Blocking - process (making the request blocks - lets other process
execute) suspended until I/O completed
Easy to use and understand
Insufficient for some needs
multi-threading - depends on role of OS in thread management
Nonblocking - I/O call returns as much as available
User interface, data copy (buffered I/O)
Implemented via multi-threading
Returns quickly with count of bytes read or written - ex: read a “small”
portion of a file very quickly, use it, and go back for more, ex:
displaying video “continuously from a disk”
Asynchronous - process (making the asynch request) runs while I/O
executes
Difficult to use - can it continue without the results of the I/O?
I/O subsystem signals process when I/O completed - via interrupt (soft),
or setting of shared variable which is periodically tasted.
Operating System Concepts
13.17
Silberschatz, Galvin and Gagne 2002

18. Kernel I/O Subsystem

See A Kernel I/O Structure slide - Fig 13.6
Scheduling
Some I/O request ordering via per-device queue
Some OSs try fairness
Buffering - store data in memory while transferring between devices
To cope with device speed mismatch - de-couples application from
device action
To cope with device transfer size mismatch
To maintain “copy semantics” - guarantee that the version of data
written to device from a buffer is identical to that which was there
at the time of the “write call” - even if on return of the system call,
the user modifies buffer - OS copies data to kernel buffer before
returning control to user.
Double or “ping-pong” buffers - write in one and read from
another - decouples devices and applications
… idea can be extended to multiple buffers accesses in a circular
fashion
Operating System Concepts
13.18
Silberschatz, Galvin and Gagne 2002

19. Sun Enterprise 6000 Device-Transfer Rates

Operating System Concepts
13.19
Silberschatz, Galvin and Gagne 2002

20. Kernel I/O Subsystem - (continued)

Caching - fast memory holding copy of data
Always just a copy
Key to performance
How does this differ from a buffer?
Spooling - a buffer holding output/(input too) for a device
If device can serve only one request at a time
Avoids queuing applications making requests.
Data from an application is saved in a unique file associated
with the application AND the particular request. Could be
saved in files on a disk, or in memory.
Example: Printing
Device reservation - provides exclusive access to a device
System calls for allocation and deallocation
Watch out for deadlock - why?
Operating System Concepts
13.20
Silberschatz, Galvin and Gagne 2002

21. Error Handling

OS can recover from disk read, device unavailable,
transient write failures
Most return an error number or code when I/O request
fails
System error logs hold problem reports
CRC checks - especially over network transfers of a
lot of data, for example video in real time.
Operating System Concepts
13.21
Silberschatz, Galvin and Gagne 2002

22. Kernel Data Structures

Kernel keeps state info for I/O components, including open file
tables, network connections, character device state
used by device drivers in manipulating devices and data
transfer, and in for error recovery
data that has images on the disk must be kept in synch with
disk copy.
Many, many complex data structures to track buffers, memory
allocation, “dirty” blocks
Some use object-oriented methods and message passing to
implement I/O
Make data structures object oriented classes to encapsulate
the low level nature of the “device” - UNIX provides a
seamless interface such as this.
Operating System Concepts
13.22
Silberschatz, Galvin and Gagne 2002

23. UNIX I/O Kernel Data Structure

Refer to chapter 11 and 12 on files
Fig. 13.9
Operating System Concepts
13.23
Silberschatz, Galvin and Gagne 2002

24. Mapping I/O Requests to Hardware Operations

Consider reading a file from disk for a process:
How is connection made from file-name to disk controller:
Determine device holding file
Translate name to device representation
Physically read data from disk into buffer
Make data available to requesting process
Return control to process
See the 10 step scenario on pp. 479-481 (Silberschatz, 6th ed.)
for a clear description.
Operating System Concepts
13.24
Silberschatz, Galvin and Gagne 2002

25. Life Cycle of An I/O Request

Data already in buffer
Ex read ahead
Operating System Concepts
13.25
Silberschatz, Galvin and Gagne 2002

26. STREAMS (?)

STREAM – a full-duplex communication channel between
a user-level process and a device
A STREAM consists of:
- STREAM head interfaces with the user process
- driver end interfaces with the device
- zero or more STREAM modules between them.
Each module contains a read queue and a write queue
Message passing is used to communicate between
queues
Operating System Concepts
13.26
Silberschatz, Galvin and Gagne 2002

27. The STREAMS Structure

Operating System Concepts
13.27
Silberschatz, Galvin and Gagne 2002

28. Performance sect 13.7

I/O a major factor in system performance:
Places demands on CPU to execute device driver, kernel I/O code
resulting in context switching
interrupt overhead
Data copying - loads down memory bus
Network traffic especially stressful
See bulleted list on page 485 (Silberschatz, 6th ed.)
Improving Performance
See bulleted list on page 485 (Silberschatz, 6th ed.)
Reduce number of context switches
Reduce data copying
Reduce interrupts by using large transfers, smart controllers, polling
Use DMA
Move proccessing primitives to hardware
Balance CPU, memory, bus, and I/O performance for highest
throughput
Operating System Concepts
13.28
Silberschatz, Galvin and Gagne 2002

29. Intercomputer Communications- omit for now

Operating System Concepts
13.29
Silberschatz, Galvin and Gagne 2002

30. Device-Functionality Progression

Where should I/O functionality be implemented? Application
level … device hardware
Decision depends on trade-offs in the design layers:
Operating System Concepts
13.30
Silberschatz, Galvin and Gagne 2002
English     Русский Правила