固件升级说明 (Firmware Upgrade Instructions V6_v3.2216.00.00)

1.

固件升级说明-Firmware Upgrade
InstructionsV6_v3.2216.00.00
专业 Specialty • 创新 Innovation • 激情 Passion • 责任Responsibility • 主动 Active

2.

驱动安装--Driver Installation
打开文
件夹
双击
安装
安装完后点
击确定 重
启电脑
点
击
安
装

3.

一、准备工作--Preparation
1、工具存放目录及路径不能有中文-- The tool storage directory and path cannot contain Chinese
characters
2、解压“SP_MDT_V6_exe_v6.2216.00.00(1)” 双击“mdt.exe”打开下载工具。
专业 Specialty • 创新 Innovation • 激情 Passion • 责任Responsibility • 主动 Active

4.

二、工具主界面--Tool main interface
1、软件路径不要有中文-- Do not have Chinese in
the software path
专业 Specialty • 创新 Innovation • 激情 Passion • 责任Responsibility • 主动 Active

5.

三、加载软件版本文件--Load software version file
选择软件版本 找到软件版本解压地址 点击软件包里的“download_agent”文件夹的Flash XML文件 加载flash.xml
文件 举例如下 ---Select the software version, find the decompression address of the software version,
click the Flash XML file in the "download_agent" folder in the software package, and load the flash.xml
file, as follows;
专业 Specialty • 创新 Innovation • 激情 Passion • 责任Responsibility • 主动 Active

6.

四、搜索USB端口--search usb port
1.勾选“Select All” 勾选全部端口。-- Check "Select All" Check all ports
2.点击Scan-扫描端口---Click Scan-scan port
此时手机关机 插入USB 直至该项提示“端口出现 端口右侧显示OK字样” 后拔出手机 此时为搜索端口成功。--At
this time, the mobile phone is turned off, and the USB is inserted until the item prompts "the port appears, and the word OK is
displayed on the right side of the port" and then pull out the mobile phone. At this time, the search port is successful.
3.点击Stop all 停止搜索。--Click Stop all. Stop searching.
专业 Specialty • 创新 Innovation • 激情 Passion • 责任Responsibility • 主动 Active

7.

五、升级版本-updated version
1.勾选已经搜索成功的端口
Check the ports that have been successfully searched
2.点击Start All 等待加载完成
Click Start All and wait for the loading to complete
3.此时手机关机 插入对应端口的USB 直至下载完成显示为PASS 拔出手机。--At this time, the mobile phone is
turned off, plug in the USB of the corresponding port, until the download is completed and it is
displayed as PASS, then pull out the mobile phone.
专业 Specialty • 创新 Innovation • 激情 Passion • 责任Responsibility • 主动 Active

8.

五、升级版本--updated version
专业 Specialty • 创新 Innovation • 激情 Passion • 责任Responsibility • 主动 Active

9.

六、升级完成及升级失败注意事项-- Precautions for
Upgrade Completion and Upgrade Failure
1.下载中途异常导致升级失败的主板 需要保持原电脑升级。
If the motherboard fails to be upgraded due to an abnormality in the middle of the download, the original computer needs to
be upgraded.
2.失败的主板在原电脑升级完成后会将备份参数还原到主板。
The failed motherboard will restore the backup parameters to the motherboard after the upgrade of the original computer is
completed.
3.如果失败的主板换电脑升级完成会导致参数丢失 显示未校准、Barcode-SN为空。
If the failed motherboard is replaced with a computer, the upgrade will result in the loss of parameters, display uncalibrated,
and Barcode-SN is empty.
专业 Specialty • 创新 Innovation • 激情 Passion • 责任Responsibility • 主动 Active

10.

thanks
专业 Specialty • 创新 Innovation • 激情 Passion • 责任Responsibility • 主动 Active