产品介绍. 产品编号

1.

1
产品介绍
1
产品编号
Plastic mould 13044.01
(M5)
2
产品名称
13044.01
3
数据版本
V1
4
产品大小 mm
5
产品壁厚 mm
6
产品材料
7
产品收缩率 %
8
产品表面处理
24X52X45
LDPE-30%/寒冷剂+发紫外线剂+
色料-8%/POLYPROPYLENE62%
抛光

2.

2
P.L确认
Cav.
PL
Cor.
Cav.
PL
Cor.
问题描述 issue
产品分型从粉色线过 请确认。
The pink line is parting line, please check it.
客户回复customer reply

3.

3
夹线确认
问题描述 issue
产品上的机构夹线 大致
Please check the split line from picture.
客户回复customer reply

4.

4 脱模角度分析
问题描述 issue
指示绿色面无斜度 产品有拉伤风险。
建议 增加0.5°脱模。
There are no draft angle, will have risk of
sticking. Kaihua suggest: add 0.5°angle.
客户回复customer reply

5.

5 出模方向分析
Interference
Interference
问题描述 issue
机构滑出和指示筋干涉。修改建议见下一页。
There are interference with rib when structure moved.
Please check Kaihua suggestion from next page.
客户回复customer reply

6.

6
Cancel
fillet
问题描述 issue
取消左侧圆角使倒扣全部从右侧出模 需要减胶修
改指示顶面 减胶量0.7mm 使倒扣可以旋转出模
。请确认。
Cancel fillet of left side in order to demold from right
side. Need to reduce plastic material (reduce 0.7mm) at
point area to ensure demold. Please check it.
客户回复customer reply

7.

7
壁厚分析
问题描述 issue
产品壁厚如图分布。
The thickness of product is shown as picture.
客户回复 customer reply

8.

8
问题描述 issue
这段1mm较长塑料无法满足流动 建议加粗到
1.5mm。
The red line area can not forming. Kaihua
suggest: To increase to 1.5mm.
客户回复 customer reply

9.

WE ARE JUST ON THE
WAY
THANK YOU.