产品介绍. 产品编号

1.

1
产品介绍
1
产品编号
Plastic mould 14038.04
_M7-2
2
产品名称
14038.04
3
数据版本
V1
4
产品大小 mm
5
产品壁厚 mm
6
产品材料
7
产品收缩率 %
8
产品表面处理
40X27X17
Polyamide PA 30%
抛光

2.

2
P.L确认
Cav.
PL
Cor.
Cav.
PL
Cor.
问题描述 issue
红色线为产品分型线 请确认。
The red line is parting line, please check it.
客户回复customer reply

3.

3 脱模角度分析
问题描述 issue
绿色面均无脱模斜度。避免牢模
建议减胶增加0.5°脱模。
There are no draft angle at green surface. In order to avoid
sticking, kaihua suggest to reduce plastic and increase
0.5°angle.
客户回复customer reply

4.

4
壁厚分析
问题描述 issue
产品壁厚如图分布。
The thickness of procuct is shown as picture.
客户回复 customer reply

5.

5 产品与图纸对比
问题描述 issue
产品与图纸对比存在误差 请确认
There are difference between 3D data and 2D
drawing. Please check which one is correct.
客户回复 customer reply

6.

6 产品与图纸对比
问题描述 issue
为避免间距做大 建议将产品数据调整到下公差
14.4mm 请确认
In order to avoid mistake, Kaihua suggect to adjust to
14.4mm directly. Please check it.
客户回复 customer reply

7.

WE ARE JUST ON THE
WAY
THANK YOU.