Honda Fit Turbo Kit

1. Honda Fit Turbo Kit

Installation Manual

2. Take off windshield wiper

3. Take this part off

4. Take off the engine of windshield wiper

5. Uninstall the protecting hood

6. Take off the front bumper

7. Take off the stock manifold

8. Remember to keep the stock O2 Sensor that you take off

9. Take off the stock mid-pipe

10. Remember to keep the stock O2 Sensor that you take off

11. Install manifold on the turbocharger

12. Please note this particular bolt should be locked from the bottom up, so it doesn’t block another bolt beside it. Other 3 bolts

are locked the normal way from top.

13. Install the silicon hose first, remember the turbo clamp, too

14. Turbocharger can be installed from this angle

15. Connect compressor housing inlet and air filter with Aluminum pipe

Lock up
spot
Connect compressor housing inlet and air filter with Aluminum pipe

16. Please assemble the pipes according to the specified order above

17. Aluminum Pipe 1

1
Lock up
spot
Aluminum Pipe 1

18. Aluminum Pipe 2

19. Aluminum Pipe 3

Lock up
spot
Aluminum Pipe 3

20. Install intercooler, please pay attention to the 3 lock up spots.

21. Aluminum Pipe 4

Lock up
spot
Aluminum Pipe 4

22. Aluminum Pipe 5

Install the
smaller air
filter
Install
blow off
Aluminum Pipe 5

23. Install vacuum pipe

Set up of aluminum pipe and vacuum pipe
Blow off
MAP sensor
Install vacuum pipe

24. Install oil feed line

Please lock
it tight to
prevent oil
leakage
Install oil feed line

25. Oil feed line set up

26. Connection of oil feed line on the engine side

27. Install oil drain pipe

28. Install front pipe

29. Install mid pipe

Connect O2 Sensor
onto mid pipe first,
then install both
onto to car
Install mid pipe

30. Remember to connect O2 Sensor

31. Install the protecting hood back up

32. Install engine of windshield wiper back up

33. Put the cover back

34. Install windshield wiper back on

35. Put the front bumper back

36. THE END