Panorama initialization manual

1.

▣ UM PANORAMA SUNROOF’S INSTALL OF INITIALIZATION MANUAL
1
Closing of Sunroof’s glass & blind
3
Complete initialization &
check the normal movement
Forward
▶Press the button of Over Head Console Lamp like the picture,
and then release the button after check the closing of glass and
blind.
2
Blind open & glass tilt
Glass’s Tilt up
▶After 2nd action, Press the button forward again in 1~2 second
and check the following action, GLASS TILT DOWN→
GLASS OPEN→GLASS CLOSE→BLIND CLOSE and then release
the button.
▶CAUTION
Do not release the button on movement. (initialization failed)
▶After initialization of sunroof, please check the normal movement
of glass and blinds.
※Please vehicle’s power on or start up the engine before
to carry out the initialization
Blind’s full open
▶Press the button forward consistently(about 5~10sec) and
check the following action, BLIND’S OPEN→GLASS TILT UP→
SOUND OF MOTOR’S ‘CLICK’ and then release the button.
▶CAUTION
Do not release the button on movement. (initialization failed)

2.

▣ UM PANORAMA SUNROOF’S DELETE OF INITIALIZATION MANUAL
1
Delete of initialization
2
Checking delete of initalizaion
Backward
Forward
▶Wait for 3~5 seconds after vehicle’s door closed.
▶Keep pressing backward the button of OHCL like the picture
and then start up the engine.
▶After start up the engine, You have to keep pressing the button
(about 5 seconds) and then you can let it go.
▶After 1st action, Press(tap) the button forward about 4~5 times.
(If the delete is made completely, Glass will be moved manually
when you tap the button.)
▶After confirming for the delete is made, install the initialization
(refer to Slide 1 for installing initialization)