Похожие презентации:
Fluidic Module. ABL700 Service Course
1. Fluidic Module
RED SYSTEM™ABL700 Service Course
Fluidic Module
1
2. Fluidic Module - Overall Function
RED SYSTEM™ABL700 Service Course
Fluidic Module - Overall Function
Connects to solution bottles and waste container
Transports solutions from the bottles to the measuring
modules, and
Transports blood and aqueous solutions from:
the inlet to the waste container
the measuring modules via the inlet to the waste container.
2
3. Fluidic Module - Wet Section
RED SYSTEM™ABL700 Service Course
3
Fluidic Module - Wet Section
Gas Unit
pH/BG
Module
Inlet
Module
Fluidic Module left
El/Met
Module
OXI Module
Pre
heater
Fluidic Module right
4. Fluidic Module - Top View
RED SYSTEM™ABL700 Service Course
4
Fluidic Module - Top View
V8
P1
V7
V4
V5
V6
V3
V2
V1
Bottle connectors
P2
5. Fluidic Module - Waste Valve
RED SYSTEM™ABL700 Service Course
Fluidic Module - Waste Valve
Situation:
The analyzer moves liquid in the direction from OXI, via
Fluidic, towards the waste container
The waste valve, its connection, or driver is defective and
the valve does not open
What may happen?
There is a risk that what is supposed to go to waste may end
up in one of the solution bottles
5
6. Fluidic Module - Waste Valve
RED SYSTEM™ABL700 Service Course
6
Fluidic Module - Waste Valve
Therefore:
The waste valve (membrane) is different from the other
valves to ensure that it opens before the other valves
in case of an overpressure
Waste
From OXI
towards waste
Solution
bottle
7. Fluidic Module - Electronics
RED SYSTEM™ABL700 Service Course
Fluidic Module - Electronics
The PCB is controlled by the Analyzer Control PCB
The PCB includes:
Connection to Analyzer Control PCB via I2C bus
Valve drivers
Pump motor drivers
Waste pump is unidirectional
Connection to Bottle Illumination PCBs and Waste Detector
7
8. Fluidic Module - Electronics Block Diagram
RED SYSTEM™ABL700 Service Course
8
Fluidic Module - Electronics Block Diagram
Analyzer
Control PCB
(waste Detector)
Bottle Ilumination
PCBs
Valve Driver
V8 V7 V6 V5 V4 V3 V2 V1
Pump
Driver
P1
P2
9. Fluidic Module - Service Program
RED SYSTEM™ABL700 Service Course
Fluidic Module - Service Program
Pump check program
Pump may be set to turn in different directions at different speeds
Pump calibration
Statistics
Valve check program
Possibility of checking pull/release function
Statistics
9
10. Fluidic Module - Exploded View
RED SYSTEM™ABL700 Service Course
Fluidic Module -
10
2
3
Exploded View
4
1
5
6
7
12
8
11
9
10