D’andrea auto changer system

1.

D’ANDREA AUTO CHANGER SYSTEM
DBC SERIES ; LAYOUT CONFIGURATION
Dec. 05. 2019
HBM Part
본 문서는 두산공작기계 ( 주 ) 정보자산으로 , 승인을 받지 않은 문서의 열람 , 수정 , 배포 , 복사를 금지합니다 .
This document is the informational asset of Doosan Machine Tools Co., Ltd. Thus, unauthorized access, revision, distribution and copying of this
document are strictly prohibited.

2.

D’andrea Auto Changing System_Layout
SPLASH GUARD
TABLE
CHIP CONVEYOR
CHIP BUCKET
STACKER
STACKER BASE
COOLANT TANK
|2

3.

D’andrea Auto Changing System Configuration; DBC 130 II
- Stacker Position : Outside of Splash guard
- Table size : 1600mm X 1800mm / Max. Swing of Workpiece : Φ2700mm
- Stacker will transferred by X axis base when changing the D’andrea U-Head
- X axis machining stroke : 2000mm, Changing stroke : 25mm & 975mm
- Stacker stroke : 3000mm
Stacker Stroke : 3000mm
STACKER
Changing Stroke : 975mm
Machining Stroke : 2000mm
STACKER BASE
Changing Stroke : 25mm
|3

4.

D’andrea Auto Changing System Configuration; DBC 130L II
- Stacker Position : Outside of Splash guard
- Table size : 1600mm X 1800mm / Max. Swing of Workpiece : Φ3400mm
- Stacker will transferred by X axis base when changing the D’andrea U-Head
- X axis machining stroke : 3000mm, Changing stroke : 25mm & 975mm
- Stacker stroke : 4000mm
Stacker Stroke : 4000mm
STACKER
Changing Stroke : 975mm
Machining Stroke : 3000mm
STACKER BASE
Changing Stroke : 25mm
|4

5.

D’andrea Auto Changing System Configuration ; Machining Stroke; DBC 130 II
- Table size : 1600mm X 1800mm / Max. Swing of Workpiece : Φ2700mm
- Stacker don’t move when machining
- X axis machining stroke : 2000mm
Table
Center
Spindle Center
1000mm
Spindle Center
Table
Center
1000mm
Machining Home Position
|5

6.

D’andrea Auto Changing System Configuration ; Machining Stroke; DBC 130L II
- Table size : 1600mm X 1800mm / Max. Swing of Workpiece : Φ3400mm
- Stacker don’t move when machining
- X axis machining stroke : 3000mm
Table
Center
Spindle Center
1500mm
Spindle Center
Table
Center
1500mm
Machining Home Position
|6

7.

D’andrea Auto Changing System Configuration ; Sequence of U-head Changing
- Go to Machining Home Position
- Move to Changing Home Position : 25mm
- Clamping the Stacker base Unlocating the Stacker base
Machining Home Position
Changing Home Position
Machining Home Position
U-Tronic Center
U-Tronic Center
Go to Changing Home
Go to Machining Home
25mm
DBC 130 II : 1975mm
DBC 130L II : 2975mm
DBC 130 II : 2000mm
DBC 130L II : 3000mm
TABLE
TABLE BASE
Locating Pin for Stacker base
: Unlocating
Clamping System
: Clamping
STACKER BASE
|7

8.

D’andrea Auto Changing System Configuration ; Sequence of U-head Changing
- Go to Changing Position Changing U-Head
- Go to Changing Home Position
- Unclamping the Stacker base Locating the Stacker base Go to Machining Home Position
Changing Home Position
Spindle
Center
Table Center
Go to Changing Position
Go to Changing Home
Changing U-Head
1975mm
DBC 130 II : 1975mm
DBC 130L II : 2975mm
Locating Pin for Stacker base
: Locating
Go to
Machining
Home Position
Clamping System
: Unclamping
|8

9.

Supply Scope ; Preparation
※ Consult with Doosan R&D about detail specification
- Doosan Scope : DBC Boring Machine, Stacker & Stacker Base, Servo Motor AMP for U-Head
- Customer Scope : U-Tronic (& TA-Center), Dummy Plate, U-Head Support, Spindle Flange
Tool Holder & Tool for U-Head
Doosan Scope
Customer Scope
Spindle Flange
DBC Boring Machine
Servo Motor AMP
for U-Head
Dummy Plate
U-Head Support
U-Tronic
TA-Center
Stacker
Stacker Base
Tool Holder & Tool
for U-Head
|9

10.

Supply Scope ; Full package
※ Consult with Doosan R&D about detail specification
- Doosan Scope : DBC Boring Machine, Stacker & Stacker Base, Servo Motor AMP for U-Head
U-Tronic (& TA-Center), Dummy Plate, U-Head Support, Spindle Flange
- Customer Scope : Tool Holder & Tool for U-Head
Spindle Flange
Doosan Scope
DBC Boring Machine
Servo Motor AMP
for U-Head
Dummy Plate
U-Head Support
U-Tronic
TA-Center
Customer Scope
Stacker
Stacker Base
Tool Holder & Tool
for U-Head
| 10

11.

Machine Layout ; DBC 130 II
| 11

12.

Machine Layout ; DBC 130L II
EOD
| 12